ECO Skate

Three-point bearing

ECO Skate MINI

ECO-Skate MINI (PU)

The ECO-Skate MINI series has a particularly low installation height of just 60 millimeters and, with a total load capacity of 5 or 10 tons, allows it to be used on machines or other heavy parts at low room heights. All load moving skates are delivered as standard with pulling bar and alignment bars as well as HTS polyurethane wheels and can be combined with each other as required. The sum of the individual load capacities results in the total load. The wheels of the ECO-Skate MINI series can also be ordered separately.

The following distinguishes the transport trolleys of the ECO-Skate MINI (PU) series:

  • Pulling bar and alignment bar
    The transport trolleys of the MINI series come standard with pulling bar and alignment bar. Special lengths on request.
  • Low weight
    Practical grips, which are attached to all suspensions, and low weight makes the MINI series a flexible companion.
  • Can be combined
    All transport trolleys of the MINI series can be combined with one another as desired. The total load results from the sum of the individual load capacities.
  • HTS wheels
    The Skates are equipped as standard with HTS high quality, non-marking polyurethane wheels, which can also be ordered separately. Equipment with HTS steel wheels on request.

For all areas of application in which the standard range from the standard range is insufficient, we design special solutions that are individually tailored to the customer.

ECO Skate MINI M25L-PU

M25L (PU)

Article Number 10.025.07.10
Load (kg) 2500
Dimensions L x B x H (mm) 245 x 333 x 60
Drawbar length (mm) 1000
Adjustability (mm) -
Weight (kg) 10.5
ECO Skate MINI M25S-PU

M25S (PU)

Article Number 10.025.07.20
Load (kg) 2 x 1250
Dimensions L x B x H (mm) 163 x 116 x 60
Drawbar length (mm) -
Adjustability (mm) 116 - 690
Weight (kg) 5.6
ECO Skate MINI M25L-PU Set

M25L (PU) + M25S (PU) Set

Article Number 10.025.07.20 + 10.025.07.10
Weight (kg) 5000
Default product image

MN25L (NY)

Article Number 10.025.08.10
Load (kg) 2500
Dimensions L x B x H (mm) 250 x 329 x60
Drawbar length (mm) 1000
Weight (kg) 9.5
Default product image

MN25S (NY)

Article Number 10.025.08.20
Load (kg) 5000
Dimensions L x B x H (mm) 162 x 114 x 60
Weight (kg) 4.65
ECO Skate MINI M50L

M50L (PU)

Article Number 10.050.07.10
Load (kg) 5000
Dimensions L x B x H (mm) 245 x 534 x 60
Drawbar length (mm) 1000
Adjustability (mm) -
Weight (kg) 14.6
ECO Skate MINI M50S

M50S (PU)

Article Number 10.050.07.20
Load (kg) 4 x 1250
Dimensions L x B x H (mm) 163 x 116 x 60
Drawbar length (mm) -
Adjustability (mm) 348 - 690
Weight (kg) 10
ECO Skate MINI M50L PU M50S PU Set

M50L (PU) + M50S (PU) Set

Article Number 10.050.07.20 + 10.050.07.10
Load (kg) 10000
Default product image

MN50L (NY)

Article Number 10.050.08.10
Load (kg) 5000
Dimensions L x B x H (mm) 250 x 533 x 60
Weight (kg) 12.6
Default product image

MN50S (NY)

Article Number 10.050.08.20
Load (kg) 4 x 1.1250
Weight (kg) 8
ECO Skate IDEAL PU

ECO-Skate IDEAL (PU)

With the load moving skates of the ECO-Skate IDEAL (PU) series, loads of up to 30 tonnes can be moved. All heavy-duty skates are delivered as standard with pulling bar and alignment bar as well as HTS polyurethane wheels, on request also steel wheels. All load moving systems of the ECO-Skate IDEAL (PU) series can be combined as desired with each other with all other trolleys of the same height. The sum of the individual load capacities results in the total load. The wheels of the ECO-Skate IDEAL (PU) series are also available separately.

The following distinguishes the transport trolleys of the ECO-Skate IDEAL (PU) series:

  • Pulling bar and alignment bar
    The skates of the IDEAL series come standard with pulling bar and alignment bar. Special lengths on request.
  • Foldable alignment bar
    The alignment bar of the i60S, i90S and i120S can be folded.
  • Combineable
    All load moving skates of the IDEAL series can be combined with each other and with trolleys of the series IDEAL (NY), ROTO and DUO. The total load results from the sum of the individual load capacities.
  • HTS wheels
    The skates are equipped as standard with HTS high quality, non-marking polyurethane wheels, which can also be ordered separately. Equipment with HTS steel wheels on request.

For all areas of application in which the standard range from the standard range is insufficient, we design special solutions that are individually tailored to the customer needs.

ECO Skate IDEAL i30L

i30L (PU)

Article Number 10.030.00.10
Load (kg) 3000
Dimensions L x B x H (mm) 238 x 268 x 110
Drawbar length (mm) 1000
Adjustability (mm) -
Weight (kg) 13.5
i30S (PU)

i30S (PU)

Article Number 10.030.00.20
Load (kg) 2 x 1500
Dimensions L x B x H (mm) 228 x 132 x 110
Drawbar length (mm) -
Adjustability (mm) 265 - 900
Weight (kg) 14
i30L (PU) + i30S (PU) Set

i30L (PU) + i30S (PU) Set

Article Number 10.030.00.20 + 10.030.00.10
Load (kg) 6000
i60L (PU)

i60L (PU)

Article Number 10.060.00.10
Load (kg) 6000
Dimensions L x B x H (mm) 339 x 483 x 110
Drawbar length (mm) 1000
Adjustability (mm) -
Weight (kg) 26
i60S (PU)

i60S (PU)

Article Number 10.060.00.20
Load (kg) 2 x 3000
Dimensions L x B x H (mm) 291 x 220 x 110
Drawbar length (mm) -
Adjustability (mm) 420 - 1100
Weight (kg) 29
i60L (PU) + i60S (PU) Set

i60L (PU) + i60S (PU) Set

Article Number 10.060.00.20 + 10.060.00.10
Load (kg) 12000
i90L (PU)

i90L (PU)

Article Number 10.090.00.10
Load (kg) 9000
Dimensions L x B x H (mm) 525 x 780 x 110
Drawbar length (mm) 1170
Adjustability (mm) -
Weight (kg) 57
i90S (PU)

i90S (PU)

Article Number 10.090.00.20
Load (kg) 2 x 4500
Dimensions L x B x H (mm) 295 x 295 x 110
Drawbar length (mm) -
Adjustability (mm) 460 - 1145
Weight (kg) 36
i90L (PU) + i90S (PU) Set

i90L (PU) + i90S (PU) Set

Article Number 10.090.00.20 + 10.090.00.10
Load (kg) 18000
i120L (PU)

i120L (PU)

Article Number 10.120.00.10
Load (kg) 12000
Dimensions L x B x H (mm) 525 x 982 x 110
Drawbar length (mm) 1170
Adjustability (mm) -
Weight (kg) 68
i120S (PU)

i120S (PU)

Article Number 10.120.00.20
Load (kg) 2 x 6000
Dimensions L x B x H (mm) 291 x 382 x 110
Drawbar length (mm) -
Adjustability (mm) 560 - 1095
Weight (kg) 45
i120L (PU) + i120S (PU) Set

i120L (PU) + i120S (PU) Set

Article Number 10.120.00.20 + 10.120.00.10
Load (kg) 24000
i150L (PU)

i150L (PU)

Article Number 10.150.00.10
Load (kg) 15000
Dimensions L x B x H (mm) 568 x 1192 x 110
Drawbar length (mm) 1170
Adjustability (mm) -
Weight (kg) 99
i150S (PU)

i150S (PU)

Article Number 10.150.00.20
Load (kg) 2 x 7500
Dimensions L x B x H (mm) 291 x 500 x 110
Drawbar length (mm) -
Adjustability (mm) 695 - 1403
Weight (kg) 67
i150L (PU) + i150S (PU) Set

i150L (PU) + i150S (PU) Set

Article Number 10.150.00.20 + 10.150.00.10
Load (kg) 30000
ECO-Skate IDEAL (NY)

ECO-Skate IDEAL (NY)

With the load moving system of the ECO-Skate IDEAL (NY) series, loads of up to 40 tonnes can be moved on all smooth and level floors. All heavy-duty trolleys come standard with pulling bar and alignment bar as well as HTS nylon wheels. HTS nylon wheels are high quality and abrasion resistant. They have extremely low rolling resistance, making it easy to move larger weights by hand. Required pulling devices can also be smaller. All load moving skates of the ECO-Skate IDEAL (NY) series can be combined as desired. The sum of the individual load capacities results in the total load. The wheels of the ECO-Skate IDEAL (NY) series are also available separately.

The following distinguishes the ECO-Skate IDEAL (NY) transport trolleys:

  • Pulling bar and alignment bar
    The skates of the IDEAL series come standard with pulling bar and alignment bar. Special lengths on request.
  • Foldable alignment bar
    The alignment bars of the iN80S, iN120S and iN160S are foldable.
  • Combinable
    All transport load moving skates of the IDEAL (NY) series can be combined with each other and with skates of the IDEAL, ROTO and DUO series. The total load results from the sum of the individual load capacities.
  • HTS nylon wheels
    All Skates come standard with HTS high quality, non-marking nylon wheels, which have very low rolling resistance. They are made of solid material and not produced by injection molding. As a result, they are particularly high quality and resistant to abrasion. The very high payloads that result from this can never be achieved with rolls of conventional nylon tubes. HTS nylon wheels can also be ordered separately.

For all areas of application in which the standard range from the standard range is insufficient, we design special solutions that are individually tailored to the customer.

iN40L (NY)

iN40L (NY)

Article Number 10.040.01.10
Load (kg) 4000
Dimensions L x B x H (mm) 238 x 268 x 110
Drawbar length (mm) 1000
Adjustability (mm) -
Weight (kg) 12
iN40S (NY)

iN40S (NY)

Article Number 10.040.01.20
Load (kg) 2 x 2000
Dimensions L x B x H (mm) 228 x 132 x 110
Drawbar length (mm) -
Adjustability (mm) 265 - 1.000
Weight (kg) 12
iN40L (NY) + iN40S (NY) Set

iN40L (NY) + iN40S (NY) Set

Article Number 10.040.01.20 + 10.040.01.10
Load (kg) 8000
iN80L (NY)

iN80L (NY)

Article Number 10.080.01.10
Load (kg) 8000
Dimensions L x B x H (mm) 339 x 483 x 110
Drawbar length (mm) 1000
Adjustability (mm) -
Weight (kg) 21
iN80S (NY)

iN80S (NY)

Article Number 10.080.01.20
Load (kg) 2 x 4000
Dimensions L x B x H (mm) 291 x 220 x 110
Drawbar length (mm) -
Adjustability (mm) 420 - 1100
Weight (kg) 25
iN80L (NY) + iN80S (NY) Set

iN80L (NY) + iN80S (NY) Set

Article Number 10.080.01.20 + 10.080.01.10
Load (kg) 16000
iN120L (NY)

iN120L (NY)

Article Number 10.120.01.10
Load (kg) 12000
Dimensions L x B x H (mm) 525 x 780 x 110
Drawbar length (mm) 1170
Adjustability (mm) -
Weight (kg) 50
iN120S (NY)

iN120S (NY)

Article Number 10.120.01.20
Load (kg) 2 x 6000
Dimensions L x B x H (mm) 295 x 295 x 110
Drawbar length (mm) -
Adjustability (mm) 460 - 1145
Weight (kg) 29
iN120L (NY) + iN120S (NY) Set

iN120L (NY) + iN120S (NY) Set

Article Number 10.120.01.20 + 10.120.01.10
Load (kg) 24000
iN160L (NY)

iN160L (NY)

Article Number 10.160.01.10
Load (kg) 16000
Dimensions L x B x H (mm) 525 x 982 x 110
Drawbar length (mm) 1170
Adjustability (mm) -
Weight (kg) 60
iN160S (NY)

iN160S (NY)

Article Number 10.160.01.20
Load (kg) 2 x 8000
Dimensions L x B x H (mm) 291 x 382 x 110
Drawbar length (mm) -
Adjustability (mm) 560 - 1095
Weight (kg) 36
iN160L (NY) + iN160S (NY) Set

iN160L (NY) + iN160S (NY) Set

Article Number 10.160.01.20 + 10.160.01.10
Load (kg) 32000
iN200L (NY)

iN200L (NY)

Article Number 10.200.01.10
Load (kg) 20000
Dimensions L x B x H (mm) 568 x 1192 x 110
Drawbar length (mm) 1170
Adjustability (mm) -
Weight (kg) 89
iN200S (NY)

iN200S (NY)

Article Number 10.200.01.20
Load (kg) 2 x 10000
Dimensions L x B x H (mm) 291 x 500 x 110
Drawbar length (mm) -
Adjustability (mm) 695 - 1403
Weight (kg) 57
iN200L (NY) + iN200S (NY) Set

iN200L (NY) + iN200S (NY) Set

Article Number 10.200.01.20 + 10.200.01.10
Load (kg) 40000
ECO-Skate XL (PU)

ECO-Skate XL (PU)

Each ECO-Skate XL (PU) load moving skate has a frame and wheel box where each wheel is individually supported. This avoids flexing of the axle during short-term overload. Each ECO-Skate XL (PU) heavy duty load moving system can be combined with any other heavy duty load moving skate with the same height. The total load results from the sum of the individual load capacities. The Skates are equipped as standard with HTS polyurethane wheels, which can also be ordered separately.

The following distinguishes the transport trolleys of the ECO-Skate XL (PU) series:

  • Single support
    Each wheel is individually mounted on the XL Series frame or wheel boxes. This prevents bending of the axis in the event of a short-term overload.
  • Pulling bar and alignment bar
    The load moving skates of the XL series are delivered as standard with a pulling bar and alignment bar. Special lengths on request.
  • Sturdy alignment bars
    The two alignment bars are made of stable galvanized square tubes. Special lengths on request.
  • Combinable
    All load moving skates of the XL series can be combined with each other and with trolleys of the BALANCE DUO XL and ROTO XL series. The total load results from the sum of the individual load capacities.
  • HTS high quality polyurethane wheels
    The skates are equipped as standard with HTS high quality non-marking polyurethane wheels, which can also be ordered separately.

For all areas of application in which the standard range is insufficient, we design special solutions that are individually tailored to the customer needs.

X16L (PU)

X16L (PU)

Article Number 10.160.02.10
Load (kg) 16000
Dimensions L x B x H (mm) 568 x 724 x 180
Drawbar length (mm) 1620
Adjustability (mm) -
Weight (kg) 133
X16S (PU)

X16S (PU)

Article Number 10.160.02.20
Load (kg) 2 x 8000
Dimensions L x B x H (mm) 464 x 215 x 180
Drawbar length (mm) -
Adjustability (mm) 220 - 1940
Weight (kg) 87
X16L (PU) + X16S Set (PU)

X16L (PU) + X16S Set (PU)

Article Number 10.160.02.20 + 10.160.02.10
Load (kg) 32000
X24L (PU)

X24L (PU)

Article Number 10.240.02.10
Load (kg) 24000
Dimensions L x B x H (mm) 568 x 932 x 180
Drawbar length (mm) 1620
Adjustability (mm) -
Weight (kg) 158
X24S (PU)

X24S (PU)

Article Number 10.240.02.20
Load (kg) 2 x 12000
Dimensions L x B x H (mm) 464 x 315 x 180
Drawbar length (mm) -
Adjustability (mm) 320 - 1940
Weight (kg) 119
X24L (PU) + X24S (PU) Set

X24L (PU) + X24S (PU) Set

Article Number 10.240.02.20 + 10.240.02.10
Load (kg) 48000
X32L (PU)

X32L (PU)

Article Number 10.320.02.10
Load (kg) 32000
Dimensions L x B x H (mm) 568 x 1142 x 180
Drawbar length (mm) 1620
Adjustability (mm) -
Weight (kg) 196
X32S (PU)

X32S (PU)

Article Number 10.320.02.20
Load (kg) 2 x 16000
Dimensions L x B x H (mm) 464 x 414 x 180
Drawbar length (mm) -
Adjustability (mm) 420 - 1660
Weight (kg) 152
X32L (PU) + X32S (PU) Set

X32L (PU) + X32S (PU) Set

Article Number 10.320.02.20 + 10.320.02.10
Load (kg) 64000
X40L (PU)

X40L (PU)

Article Number 10.400.02.10
Load (kg) 40000
Dimensions L x B x H (mm) 608 x 1342 x 180
Drawbar length (mm) 1620
Adjustability (mm) -
Weight (kg) 230
X40S (PU)

X40S (PU)

Article Number 10.400.02.20
Load (kg) 2 x 20000
Dimensions L x B x H (mm) 464 x 505 x 180
Drawbar length (mm) -
Adjustability (mm) 550 - 1650
Weight (kg) 192
X40L (PU) + X40S (PU) Set

X40L (PU) + X40S (PU) Set

Article Number 10.400.02.20 + 10.400.02.10
Load (kg) 80000
X48L (PU)

X48L (PU)

Article Number 10.480.02.10
Load (kg) 48000
Dimensions L x B x H (mm) 650 x 1671 x 180
Drawbar length (mm) 1620
Adjustability (mm) -
Weight (kg) 319
X48S (PU)

X48S (PU)

Article Number 10.480.02.20
Load (kg) 2 x 24000
Dimensions L x B x H (mm) 587 x 694 x 180
Drawbar length (mm) -
Adjustability (mm) 700 - 1690
Weight (kg) 265
X48L (PU) + X48S (PU) Set

X48L (PU) + X48S (PU) Set

Article Number 10.480.02.20 + 10.480.02.10
Load (kg) 96000
X64S (PU)

X64S (PU)

Article Number 10.640.02.20
Load (kg) 2 x 32000
Dimensions L x B x H (mm) 587 x 898 x 180
Drawbar length (mm) -
Adjustability (mm) 900 - 1600
Weight (kg) 328
Default product image

X48L (PU) + X64S (PU) Set

Article Number 10.640.02.20 + 10.480.02.10
Load (kg) 112000
ECO-Skate XL (NY)

ECO-Skate XL (NY)

Each ECO-Skate XL (NY) load moving skate has a frame and wheelbox where each wheel is individually supported. This avoids flexing of the axle during short-term overload. Each ECO-Skate XL (NY) heavy duty load moving system can be combined with any other heavy duty load moving skate with the same height. The total load results from the sum of the individual load capacities. The Skates are equipped as standard with HTS high quality, non-marking nylon wheels, which can also be ordered separately.

The following distinguishes the transport trolleys of the ECO-Skate XL (NY) series:

  • Single support
    Each wheel is individually mounted on the XL Series frame or wheel boxes. This prevents bending of the axis in the event of a short-term overload.
  • Pulling bar and alignment bar
    The load moving skates of the XL series are delivered as standard with a pulling bar and alignment bar. Special lengths on request.
  • Sturdy alignment bars
    The two alignment bars are made of stable galvanized square tubes. Special lengths on request.
  • Combinable
    All load moving skates of the XL series can be combined with each other and with skates of the BALANCE, DUO XL and ROTO XL series. The total load results from the sum of the individual load capacities.
  • HTS nylon wheels
    All Skates come standard with HTS high quality, non-marking nylon wheels, which have very low rolling resistance. They are made of solid material and not produced by injection molding. As a result, they are particularly high quality and resistant to abrasion. The very high payloads that result from this can never be achieved with rolls of conventional nylon tubes. HTS high quality, non-marking nylon wheels can also be ordered separately.

For all areas of application in which the standard range is insufficient, we design special solutions that are individually tailored to the customer needs.

XN20L (NY)

XN20L (NY)

Article Number 10.200.03.10
Load (kg) 20000
Dimensions L x B x H (mm) 568 x 724 x 180
Drawbar length (mm) 1620
Adjustability (mm) -
Weight (kg) 127
XN20S (NY)

XN20S (NY)

Article Number 10.200.03.20
Load (kg) 2 x 10000
Dimensions L x B x H (mm) 464 x 215 x 180
Drawbar length (mm) -
Adjustability (mm) 220 - 1940
Weight (kg) 80
XN20L (NY) + XN20S (NY) Set

XN20L (NY) + XN20S (NY) Set

Article Number 10.200.03.20 + 10.200.03.20
Load (kg) 40000
XN30L (NY)

XN30L (NY)

Article Number 10.300.03.10
Load (kg) 30000
Dimensions L x B x H (mm) 568 x 932 x 180
Drawbar length (mm) 1620
Adjustability (mm) -
Weight (kg) 149
XN30S (NY)

XN30S (NY)

Article Number 10.300.03.20
Load (kg) 2 x 15000
Dimensions L x B x H (mm) 464 x 315 x 180
Drawbar length (mm) -
Adjustability (mm) 320 - 1940
Weight (kg) 108
XN30L (NY) + XN30S (NY) Set

XN30L (NY) + XN30S (NY) Set

Article Number 10.300.03.20 + 10.300.03.10
XN40L (NY)

XN40L (NY)

Article Number 10.400.03.10
Load (kg) 40000
Dimensions L x B x H (mm) 568 x 1142 x 180
Drawbar length (mm) 1620
Adjustability (mm) -
Weight (kg) 182
XN40S (NY)

XN40S (NY)

Article Number 10.400.03.20
Load (kg) 2 x 20000
Dimensions L x B x H (mm) 464 x 414 x 180
Drawbar length (mm) -
Adjustability (mm) 420 - 1660
Weight (kg) 136
XN40L (NY) + XN40S (NY) Set

XN40L (NY) + XN40S (NY) Set

Article Number 10.400.03.20 + 10.400.03.10
Load (kg) 80000
XN50L (NY)

XN50L (NY)

Article Number 10.500.03.10
Load (kg) 50000
Dimensions L x B x H (mm) 608 x 1342 x 180
Drawbar length (mm) 1620
Adjustability (mm) -
Weight (kg) 214
XN50S (NY)

XN50S (NY)

Article Number 10.500.03.20
Load (kg) 2 x 25000
Dimensions L x B x H (mm) 464 x 505 x 180
Drawbar length (mm) -
Adjustability (mm) 550 - 1650
Weight (kg) 174
XN50L (NY) + XN50S (NY) Set

XN50L (NY) + XN50S (NY) Set

Article Number 10.500.03.20 + 10.500.03.10
Load (kg) 100000
ECO-Skate BIG (PU)

ECO-Skate BIG (PU)

Each ECO-Skate BIG (PU) load moving skate has a frame and wheel box where each wheel is individually supported. This avoids flexing of the axle during short-term overload. Each ECO-Skate BIG (PU) heavy duty load moving system can be combined with any other heavy duty load moving skate with the same height. The total load results from the sum of the individual load capacities. The Skates are equipped as standard with HTS polyurethane wheels, which can also be ordered separately.

The following distinguishes the transport trolleys of the ECO-Skate BIG (PU) series:

  • Single support
    Each wheel is individually mounted on the BIG Series frame or wheel boxes. This prevents bending of the axis in the event of a short-term overload.
  • Pulling bar and alignment bar
    The load moving skates of the BIG series are delivered as standard with a pulling bar and alignment bar. Special lengths on request.
  • Sturdy alignment bars
    The two alignment bars are made of stable galvanized square tubes. Special lengths on request.
  • Combinable
    All load moving skates of the BIG series can be combined with each other. The total load results from the sum of the individual load capacities.
  • HTS high polyurethane wheels
    The skates are equipped as standard with HTS high quality, non-marking polyurethane wheels, which can also be ordered separately.

For all areas of application in which the standard range is insufficient, we design special solutions that are individually tailored to the customer needs.

BIG44L (PU)

BIG44L (PU)

Article Number 09.044.04.10
Load (kg) 44000
Dimensions L x B x H (mm) 738 x 1390 x 220
Drawbar length (mm) 1775
Adjustability (mm) -
Weight (kg) 392
BIG44S (PU)

BIG44S (PU)

Article Number 09.044.04.20
Load (kg) 2 x 22000
Dimensions L x B x H (mm) 562 x 436 x 220
Drawbar length (mm) -
Adjustability (mm) 450 - 1736
Weight (kg) 220
BIG44L (PU) + BIG44S (PU) Set

BIG44L (PU) + BIG44S (PU) Set

Article Number 09.044.04.20 + 09.044.04.10
Load (kg) 88000
BIG66L (PU)

BIG66L (PU)

Article Number 09.066.04.10
Load (kg) 66000
Dimensions L x B x H (mm) 738 x 1802 x 220
Drawbar length (mm) 1775
Adjustability (mm) -
Weight (kg) 489
BIG66S (PU)

BIG66S (PU)

Article Number 09.066.04.20
Load (kg) 2 x 33000
Dimensions L x B x H (mm) 562 x 642 x 220
Drawbar length (mm) -
Adjustability (mm) 650 - 1530
Weight (kg) 326
BIG66L (PU) + BIG66S (PU) Set

BIG66L (PU) + BIG66S (PU) Set

Article Number 09.066.04.20 + 09.066.04.10
Load (kg) 132000
BIG88L (PU)

BIG88L (PU)

Article Number 09.088.04.10
Load (kg) 88000
Dimensions L x B x H (mm) 738 x 2214 x 220
Drawbar length (mm) 1775
Adjustability (mm) -
Weight (kg) 585
BIG88S (PU)

BIG88S (PU)

Article Number 09.088.04.20
Load (kg) 2 x 44000
Dimensions L x B x H (mm) 562 x 848 x 220
Drawbar length (mm) -
Adjustability (mm) 900 - 1320
Weight (kg) 432
BIG88L (PU) + BIG88S (PU) Set

BIG88L (PU) + BIG88S (PU) Set

Article Number 09.088.04.20 + 09.088.04.10
Load (kg) 176000
BIG132S (PU)

BIG132S (PU)

Article Number 09.132.04.20
Load (kg) 2 x 66000
Dimensions L x B x H (mm) 740 x 848 x 220
Drawbar length (mm) -
Adjustability (mm) 900 - 1320
Weight (kg) 583
BIG88L (PU) + BIG132S (PU) Set

BIG88L (PU) + BIG132S (PU) Set

Article Number 09.132.04.20 + 09.088.04.10
Load (kg) 220.000
ECO-Skate BALANCE (PU)

ECO-Skate BALANCE (PU)

In demanding applications, such as on uneven surfaces or very sensitive loads, you need a means of transport that optimally meets this requirement. The ECO-Skate BALANCE (PU) series offers optimum protection for the goods to be moved and overloading the individual wheel and floor. This is made possible by the independent suspension and the hydraulic load compensation of true ± 15 mm.

The following distinguishes the transport trolleys of the ECO-Skate BALANCE (PU) series:

  • Hydraulic load balancing
    Hydraulic load balancing of true ± 15 mm. Optimal protection against overloading of the individual wheels and the floor.
  • Pulling bar and alignment bar
    The load moving skates of the BALANCE series are delivered as standard with a pulling bar and alignment bar. Special lengths on request.
  • Sturdy alignment bars
    The two alignment bars are made of stable galvanized square tubes. Special lengths on request.
  • Combinable
    All load moving skates of the BALANCE series can be combined with each other and all ECO-Skates with the same height such as the XL, DUO XL and ROTO XL series. The total load results from the sum of the individual load capacities.
  • HTS polyurethane wheels
    The skates are equipped as standard with HTS polyurethane wheels, which can also be ordered separately.

For all areas of application in which the standard range from the standard range is insufficient, we design special solutions that are individually tailored to the customer.

B24L (PU)

B24L (PU)

Article Number 10.240.02.50
Load (kg) 24000
Dimensions L x B x H (mm) 684 x 960 x 180
Drawbar length (mm) 1500
Adjustability (mm) -
Weight (kg) 260
B24S (PU)

B24S (PU)

Article Number 10.240.02.60
Load (kg) 2 x 12000
Dimensions L x B x H (mm) 716 x 360 x 180
Drawbar length (mm) -
Adjustability (mm) 400 - 1940
Weight (kg) 220
Default product image

B24L (PU) + B24S (PU) Set

Article Number 10.240.02.60 + 10.240.02.60
Load (kg) 48000
B32L (PU)

B32L (PU)

Article Number 10.320.02.50
Load (kg) 32000
Dimensions L x B x H (mm) 684 x 1182 x 180
Drawbar length (mm) 1500
Adjustability (mm) -
Weight (kg) 310
B32S (PU)

B32S (PU)

Article Number 10.320.02.60
Load (kg) 2 x 16000
Dimensions L x B x H (mm) 716 x 472 x 180
Drawbar length (mm) -
Adjustability (mm) 500 - 1710
Weight (kg) 270
Default product image

B32L (PU) + B32S (PU) Set

Article Number 10.320.02.60 + 10.320.02.50
Load (kg) 64000
ECO-Skate CR

ECO-Skate CR

The HTS CR series are in production since 2003 for clean room and food applications. All standard equipment from the ECO-Jack machine lifter series or the ECO-Skate load moving systems can be manufactured as a CR series with nickel-plated surfaces and low-wear nylon rollers. Apart from clean rooms, the CR series is also used in the food, pharmaceutical and chemical industries as well as in medical technology or research.

The following distinguishes the transport trolleys of the ECO-Skate CR series:

  • Pulling and alignment bars
    The transport skates of the CR series are delivered as standard with pulling and alignment bars. Special lengths on request.
  • Nickel-plated surface and low-wear wheels
    for use in clean rooms, the food industry and pharmaceutical industry.
  • HTS high quality, non-marking nylon wheels
    All skates come standard with HTS high quality, non-marking nylon wheels, which have very low rolling resistance. They are made of solid material and not produced by injection molding. As a result, they are particularly high quality and resistant to abrasion. The very high payloads that result from this can never be achieved with rolls of conventional nylon tubes. HTS nylon wheels can also be ordered separately.
  • Combinable
    All transport skates with the same hight of the CR series can be combined with each other. The total load consists of the sum of the individual load capacities.

For all areas of application in which the standard range is insufficient, we design special solutions that are individually tailored to the customer needs.

Default product image

iN40L-CR

Article Number 12.040.01.10
Load (kg) 4000
Dimensions L x B x H (mm) 238 x 268 x 110
Drawbar length (mm) 1000
Adjustability (mm) -
Weight (kg) 12
Default product image

iN40S-CR

Article Number 12.040.01.20
Load (kg) 2 x 2000
Dimensions L x B x H (mm) 228 x 132 x 110
Drawbar length (mm) -
Adjustability (mm) 265 - 1000
Weight (kg) 12
Default product image

iN40L-CR + iN40S-CR Set

Article Number 12.040.01.20 + 12.040.01.10
Load (kg) 8000
Default product image

iN80L-CR

Article Number 12.080.01.10
Load (kg) 8000
Dimensions L x B x H (mm) 339 x 483 x 110
Drawbar length (mm) 1000
Adjustability (mm) -
Weight (kg) 21
Default product image

iN80S-CR

Article Number 12.080.01.20
Load (kg) 2 x 4000
Dimensions L x B x H (mm) 291 x 220 x 110
Drawbar length (mm) -
Adjustability (mm) 420-1100
Weight (kg) 25
Default product image

iN80L-CR + iN80S-CR Set

Article Number 12.080.01.20 + 12.080.01.10
Load (kg) 16000
Default product image

iN120L-CR

Article Number 12.120.01.10
Load (kg) 12000
Dimensions L x B x H (mm) 525 x 780 x 110
Drawbar length (mm) 1170
Adjustability (mm) -
Weight (kg) 50
Default product image

iN120S-CR

Article Number 12.120.01.20
Load (kg) 2 x 6000
Dimensions L x B x H (mm) 295 x 295 x 110
Drawbar length (mm) -
Adjustability (mm) 460 - 1145
Weight (kg) 29
Default product image

iN120L-CR + iN120S-CR Set

Article Number 12.120.01.20 + 12.120.01.10
Load (kg) 24000
Default product image

iN160L-CR

Article Number 12.160.01.10
Load (kg) 16000
Dimensions L x B x H (mm) 525 x 982 x 110
Drawbar length (mm) 1170
Adjustability (mm) -
Weight (kg) 60
Default product image

iN160S-CR

Article Number 12.160.01.20
Load (kg) 2 x 8000
Dimensions L x B x H (mm) 291 x 382 x 110
Drawbar length (mm) -
Adjustability (mm) 560 - 1095
Weight (kg) 36
iN160L-CR + iN160S-CR Set

iN160L-CR + iN160S-CR Set

Article Number 12.160.01.20 + 12.160.01.10